Assembly overview - B-pillar trim
Note
The illustration shows the B-pillar trims on the left side.
The right-hand side is similar (mirror image of left-hand side).
Upper part of B-pillar trim
I: Upper B-pillar trim, 4-door model
...
Checking outer constant velocity joint
The joint is to be dismantled to renew the grease if it is
heavily soiled, or to check the running surfaces of the balls
for wear and damage.
Removing
–
Before disman ...
Setting vehicle to initial position for wheel alignment
If measured values are outside specified tolerances, this
may be because the vehicle is inclined.
Right-hand drive vehicles or e.g. vehicles with an automatic
gearbox may lean to one side slightly.
This is due to the ins ...