Volkswagen Golf Service & Repair Manual: Anti-theft alarm system
- Assembly overview - interior monitoring, LHD vehicles
- Assembly overview - interior monitoring, RHD vehicles
- Removing and installing alarm horn -H12-
- Removing and installing anti-theft alarm sensor -G578-, version with 2 bolts
- Removing and installing anti-theft alarm sensor -G578-, version with 4 bolts
Removing and installing front right reading light button -E634-
Note
The front right reading light button -E634- is an integral
part of the front interior light -WX1- and cannot be removed
individually.
...
Assembly overview - interior monitoring, LHD vehicles
1 -
Anti-theft alarm system sensor -G578-
Removing and installing
→ Chapter
Needs parameterisation after renewal
→ ...
Other materials:
On a regulated roller dynamometer with contra-rotating rollers for
four-wheel drive vehicles
Note
The brake test must be performed on a controlled
contra-rotating single-axle roller dynamometer for four-wheel
drive vehicles.
“Contra-rotating” means that the dynamometer rollers of the
single-axle roller dynamom ...
Removing and installing retaining plate for manually operated anti-dazzle
interior mirror, with rain and light sensor -G397- and without front camera for
driver assist systems -R242-
Note
With the repair procedure described, it is no longer
necessary to renew the windscreen.
At the same time, it is also possible to reuse the
old mirror base which has fa ...
Evacuating refrigerant circuit using air conditioner service station
Always follow the procedure described in the user's manual
for your air conditioner service station.
The procedure described here is that for air conditioner
service station -VAS 6007A-.
Before the refrigerant circ ...
