Removing and installing centre underbody covers
Note
The removal and installation procedures may have to be modified
slightly depending on engine fitted.
Removing
Unclip spreader river -2- and remove
centre underbody panels.
Installing
Installation is carried out in reverse ...
Separating control unit from hydraulic unit
Special tools and workshop equipment
required
ESD workplace -VAS 6613-
Torx bit T25
If a control unit is defective, separate it from the
hydraulic unit and renew only the control ...
Determining flat spots on tyres
What is a flat spot?
The terms flat area and flats are also used for the term
flat spot.
Flat spots caused by storage or handling also cause
vibration in the same way as incorrectly balanced wheels do. It
is import ...