Releasing gas and draining front gas-filled shock absorbers, DCC shock
absorbers
–
Clamp gas-filled shock absorber vertically in vice.
WARNING
Safety goggles must be worn when drilling.
–
Drill a 3 mm hole -A ...
Removing and installing rear shelf support
Note
Removal and installation are described for the left vehicle
side. Follow same instructions for the right side as
appropriate.
Special tools and workshop equipment
required
...
Vehicles with torsion beam axle
Removing
–
If fitted, remove rear left underbody trim
→ General body repairs, exterior; Rep. gr.66.
–
Remove rear tunnel cross-piece
→ General body repairs, exterior; ...