First read and observe the introductory information and safety warnings
Vehicles should not be tow-started wherever possible. Use jump leads to start the engine instead .
For technical reasons, the following vehicles cannot be tow-started:
However, if the vehicle still has to be tow-started (manual gearbox):
NOTICE
When tow-starting, unburnt fuel can enter the catalytic converter and damage it.Corrosion protection measures for wing surface in contact with wheel housing
liner
Note
The corrosion protection measure is to be carried out in the groove
of the wing of all new replacement parts which have not had the
additional sealant applied at the factory.
The additional sealant is intended to prevent the wheel hous ...
Bleeding hydraulic system following standard procedure
Note
Bleeding the hydraulic system using brake filling and
bleeding equipment -VAS 5234- is described.
A pre-pressure of 2 bar is required for bleeding the ABS
hydraulic unit -N55-.
Specia ...
Removing and installing brake caliper
Special tools and workshop equipment required
Vehicle diagnosis, testing and information system -VAS 5051-
Tool set for brake bleeding -VAS 6564-
Insert tool with ratchet -VAS 6784-
Bit attachment (7 mm) -T10503-
...