Checking adjustment of assembly mountings (engine and gearbox mountings)
Procedure
The following specifications must be obtained:
There must be a distance of -a-
= 10 mm between engine support -2-
and engine mounting -1-.
...
Rear brakes
Assembly overview - rear brakes:
Note
Use the brake filling and bleeding equipment -VAS 5234- to
draw off brake fluid from the brake fluid reservoir.
Before removing a brake caliper or disconnecting ...
Repairing rain and light sensor, TRW
The housings for the rain and light sensors -G397- from
various manufacturers differ.
The sensor housing with lens unit is always supplied as a
replacement part in separate parts with retaining clips. In
vehicles which do not require the ...