Volkswagen Golf Service & Repair Manual: Safety precautions when using testing and measuring instruments during a road test

Volkswagen Golf Service & Repair Manual / Electrical system / Technical data / Notes on safety / Safety precautions when using testing and measuring instruments during a road test

Please note the following points if test and measuring equipment has to be used while test driving the vehicle:

WARNING

Risk of accidents due to distraction and inadequate securing of test and measuring equipment.

Danger as a result of activation of front passenger airbag in event of an accident.

Operation of test and measuring equipment while driving results in distraction.

The risk of injuries increases significantly when test and measuring equipment is not secured.

Always strap test and measuring equipment in place on rear seat and have a 2nd person sitting on the rear seat to operate it.

Safety precautions when working on vehicles with Start/Stop system

Note the following when working on vehicles with Start/Stop system: WARNING Risk of injury due to aut ...

Operation and safety notes for gas discharge bulbs

Note Never change bulbs if you are not familiar with the appropriate procedures, safety precautions or tools. ...

Other materials:

Removing and installing side trim panel
Note Removal and installation are described for the left vehicle side. Follow same instructions for the right side as appropriate. Special tools and workshop equipment required ...

Removing and installing mounting bracket, RHD vehicles
Removing – Remove wiper arms → Electrical system; Rep. gr.92. – Remove plenum chamber cover → General body repairs, exterior; Rep. gr.50. ...

Removing and installing bonnet lock, RHD vehicle
Special tools and workshop equipment required Torque wrench -V.A.G 1331- – Open bonnet. – Remove Bowden cable on mounting bracket ...