Volkswagen Golf Service & Repair Manual: Assembly tools for single wire seals

Volkswagen Golf Service & Repair Manual / Electrical system, general information / Wiring / Wiring harness and connector repairs / Assembly tools for single wire seals

The assembly tools serve as a means of sliding the single wire seals fully into the contact housing without damage and thereby assure complete sealing between single wire and contact housing.

Four assembly tools for single wire seals are included in each wiring harness repair set -VAS 1978 B- and previous versions.

Assembling single wire seals → Chapter.

Assembly tools for single wire seals

Release tools for contacts

The various release tools serve as a means of detaching the different contacts from the contact housings without damage. A selection of release tools ...

Wire strippers -VAS 1978/3-

Wire strippers -VAS 1978/3- serve as a means of stripping insulation off wires and cutting wires in the correct manner. Wire strippers -VAS 1978/3- a ...

Other materials:

Removing and installing fresh air blower control unit -J126-, RHD vehicles
Removing – Remove baffle plate → Chapter. – Disconnect electrical connectors -1- and -4-. – Remove bolts ...

Outer shoulder wear
Unsuitable use of self-levelling adjustments on pneumatic suspension system The use of the offroad level is recommended only for driving offroad. Permanent use of the offroad level during normal road operation can lead to increased tyre ...

Checking radial and lateral runout on wheels and tyres with tyre gauge
Checking lateral run-out – Preload tyre gauge approx. 2 mm. – Fit tyre gauge to side wall of tyre. – Turn wheel slowly. ...