Balancing wheel, conditions
Before you start balancing the wheels, the following
requirements must be met.
Tyre pressure must be OK.
Tread must not be worn on one side. Tread depth should be at
least 4 mm.
T ...
Adjusting assembly mountings
Procedure
–
Remove battery tray
→ Electrical system; Rep. gr.27.
–
Release hose clips -1- and
-2-, and remove air pipe.
...
Components of reversing camera system
The reversing camera system supports the driver during
reversing by providing the driver with an image of the traffic
situation behind the vehicle via display unit for control device
of front display and information control panel -J685-.
...