Volkswagen Golf Service & Repair Manual: Electrical components not installed in refrigerant circuit
- Control and regulating unit for air conditioning system -J127
- Radiator fan control unit -J293
- Radiator fan control unit -J293
- Temperature switch for evaporator -E33
- Evaporator output temperature sender -G263- or evaporator temperature sensor -G308
- Pressures and temperatures in the refrigerant circuit
- Refrigerant circuit with expansion valve
- Refrigerant circuit with restrictor and reservoir
Air conditioner compressor regulating valve -N280
The regulating valve is fitted to the air conditioner
compressor. It is activated by the operating and display unit
for Climatronic air conditioning system -E87- or t ...
Control and regulating unit for air conditioning system -J127
This control and regulating unit switches off the
refrigerant flow through the second evaporator if the
temperature at the cooling fins of the second evaporator falls ...
Other materials:
Removing and installing poly V-belt, vehicles with air conditioner
compressor
Special tools and workshop equipment
required
Locking pin -T10060 A-
Removing
–
To slacken poly V ...
Removing and installing wheel bearing unit, torsion beam axle
Special tools and workshop equipment required
Fitting sleeve -3241/4-
Hub grease cap puller -VW 637/2-
Torque wrench -V.A.G 1332-
Tool insert -T10162 A-
Torque wrench -V.A.G 1410-
...
Removing and installing headlight range control motor -V48-/-V49- (gas
discharge headlights)
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
Removing
–
Remove headlight
→ Chapt ...
